Exterior Painting in Bonney Lake

Exterior Painting in Seattle

Stanis LLC is a Washington-licensed general contractor and handyman handling exterior painting across Seattle and the Puget Sound area. In this climate a paint job is weather protection first and curb appeal second, so the prep work matters more than the brand on the can. We power wash, scrape, sand, repair damaged wood, caulk, and prime before a single coat of finish paint goes on.

Our Exterior Painting Services Include:

When to Paint a House Exterior in Seattle

Timing is the part homeowners here underestimate. Exterior coatings need dry surfaces and temperatures that stay above roughly 50°F while they cure, which in the Puget Sound region realistically means late May through September, with shoulder weeks on either side depending on the year. Paint applied to damp siding or in a cold snap will not bond properly, and the failure shows up as peeling a season or two later.

That short window is also why exterior work books out. If you are planning a summer repaint, the practical move is to get the walkthrough and written scope done in late winter or early spring so your project is scheduled before the dry stretch fills up. Wood repair and prep can often be handled ahead of the paint itself.

How Often Seattle Homes Need Repainting

In the Pacific Northwest most homes need exterior repainting every 5 to 8 years, and the number swings based on material and exposure. Cedar and other wood siding sits at the shorter end because it moves with moisture. Fiber cement and composite hold a finish longer. South and west elevations take the most UV and typically fail before the shaded sides do, which is why partial exterior repaints are a legitimate option rather than a compromise.

Signs it is time: chalky residue on your hand when you rub the siding, hairline cracking, caulk lines pulling away from trim, or any bare wood showing at the bottom edges of boards. Bare wood in this climate absorbs water fast, so it is worth addressing before the rainy season rather than after.

Prep Work Is the Job

Painting over a poorly prepared surface is the single most common reason a Seattle repaint fails early. Our standard sequence is power washing to remove dirt and mildew, scraping and sanding all failing paint, repairing or replacing rotted wood, caulking joints and trim seams, and spot priming every bare or repaired surface. Only then does finish paint go on. If we find moisture damage or rot during the inspection, you hear about it before we quote, not after work begins. Rot that has spread into framing is a structural repair, and we will tell you plainly if that is what you are looking at.

Exterior Painting Cost in the Seattle Area

Exterior work is priced after we walk the property, because prep condition drives the number more than square footage does. These starting points reflect typical Seattle-area projects.

Starting prices covering labor, prep, and standard materials. Final pricing depends on square footage, siding material, the amount of scraping and wood repair required, the number of stories, and paint selection. Estimates are free and itemized.

Why Choose Stanis LLC for Exterior Painting?

Book Your Exterior Painting Estimate

A quality exterior paint job protects your home from moisture, rot, and weather damage while it lifts curb appeal. Book the walkthrough early so your project lands inside the dry-weather window. We paint across Seattle, Bellevue, Tacoma, and 13 more cities across King and Pierce counties. Planning other work at the same time? We also handle drywall repair and bathroom and kitchen remodels. You can see our credentials and verify our Washington contractor license any time.